Cleaning your Roomba i7 robot vacuum is an important part of keeping it running optimally and efficiently. After all, a clean Roomba is a happy Roomba, and a happy Roomba can give you a cleaner, healthier home. While Roomba robots are designed to be self-cleaning, there are some areas of the machine that require a bit of extra attention. In this step-by-step guide, we’ll show you how to clean your Roomba i7 and keep it running at its best. From cleaning the dustbin and brush to maintaining the sensors, we’ll ensure your Roomba is ready to tackle the dirt and debris on your floors. So if you’re looking to get the most out of your Roomba, read on and learn how to clean your Roomba i7 properly.
How To Clean Roomba i7
- Open the Roomba i7’s lid and remove the dustbin. Empty the dustbin and brush into the trash.
- Clean the brushes on the bottom of the machine with a damp cloth.
- Remove any debris from inside the machine with a cloth or your vacuum cleaner’s hose.
- Inspect the Roomba’s sensors and clean them if necessary.
- Replace any parts that need to be replaced, such as brushes or filters, and reattach them to the machine.
- Close the Roomba i7’s lid and turn it on by pressing its power button. The robot will begin cleaning your floors!
- If the Roomba i7 stops working, check to see if there is debris in its filters and clean them as needed. If the problem persists, take it to a technician.
What You’ll Need To Clean Your Roomba i7
1. A dustbin
Your Roomba i7 comes with a dustbin, so clean it regularly. Clean the dustbin regularly by emptying it with a brush or vacuum cleaner.
2. The brushes
The brushes on your Roomba i7 need to be cleaned regularly, too. Clean the brushes by wiping them down with a cloth or vacuum cleaner.
3. The sensors
The sensors on your Roomba i7 must be maintained regularly for the machine to function correctly. Clean the sensors by gently wiping them down with a cloth or vacuum cleaner.
4. The motor
The motor on your Roomba i7 needs to be cleaned occasionally to keep it running smoothly. Clean the motor by wiping it down with a cloth or vacuum cleaner.
5. The charging dock
The charging dock on your Roomba i7 needs to be cleaned occasionally to keep it clean. Clean the charging dock by wiping it down with a cloth or vacuum cleaner.
How To Clean The Dustbin
- Open the dustbin lid by pressing the button on the side.
- Remove the waste bin by pressing down on one end and pulling it out of the machine.
- Take care to avoid touching the spinning brush inside the dustbin!
- Put the waste bin in a safe place where it will not get wet, and let it dry completely before using it again.
- To clean the inside of the dustbin, use a damp cloth to wipe down all surfaces.
- If necessary, use a vacuum cleaner with a hose attachment to clean any debris that has stuck to the inside of the dustbin.
- Replace the dustbin lid and put the machine back in operation.
How To Clean The Brushes
- Remove the brush assembly from the Roomba by unscrewing the three screws that hold it in place.
- Remove the brush head by pressing down on one end and pulling it off.
- Wipe the bristles with a dry cloth to remove any dust or debris.
- Reassemble the brush head and screw it back onto the shaft, making sure that the bristles are in the correct position.
- Replace the brush assembly and screw it back into place.
- Test the brush by spinning it around in the shaft. If it doesn’t spin freely, tighten the screws that hold it in place.
How To Clean The Sensors
- Open the robot’s cover, and remove any obstructions or debris that may be blocking the sensors.
- Clean the sensors with a soft, lint-free cloth.
- Replace any obstructions or debris that may have been removed in step 1.
- Close the robot’s cover and wait 10 seconds for the sensors to re-calibrate. If the sensor calibration fails, please get in touch with Roomba customer service for assistance.
- Your Roomba is now ready to clean. Simply press the Clean button and let it do its job.
How To Clean The Wheels And Axles
- To clean the wheels and axles, start by removing the front cover of the robot.
- Remove the four screws that hold the cover in place and then lift it off.
- Next, use a brush to clean the inside of each wheel and axle. Make sure to get into all the nooks and crannies.
- Once all of the wheels and axles have been cleaned, replace the cover and screws.
- To clean the brushes, remove the brush cassette and clean each brush using a brush cleaner.
- Finally, replace the brush cassette and screws and re-attach the front cover.
How To Clean The Filter
- Remove the filter from the robot by unplugging it from the wall and pulling it out.
- Locate the rubber gasket on the top of the filter and remove it with a clean, dry cloth.
- Rinse the filter with warm water and let it air dry. Replace the rubber gasket when done.
- Reattach the filter to the robot and plug it back into the wall.
- Your Roomba is now ready to clean!
Tips For Maintaining Your Roomba i7
Clean the Dustbin and Brush regularly
One of the most important things you can do to keep your Roomba i7 running smoothly is to clean the dustbin and brush regularly. This will help to remove any debris that may have built up over time, preventing your machine from having to work extra hard to clean.
Check the Sensors Regularly
Another important step is checking the sensors on your Roomba i7 regularly. If there are any areas of the machine that are not being cleaned properly, the sensors will signal the robot to start cleaning those areas more frequently. This will help to ensure that your Roomba is working as efficiently as possible.
Keep Your Floor Surfaces Clean and Dry
Finally, it’s important to keep your floor surfaces clean and dry. This will help to prevent debris from building up and clogging up your Roomba’s sensors.
Follow These Tips, and Your Roomba i7 Will Be Clean and Happy
Following these tips will help to keep your Roomba i7 running smoothly and efficiently. By keeping your machine clean and tidy, you’ll be able to enjoy a cleaner, healthier home.
Don’t Forget to Charge Your Roomba i7 Regularly
One last thing to keep in mind is that your Roomba i7 needs to be charged regularly. If you don’t charge it, it will run down its battery more quickly, and you’ll likely have to replace it sooner.
Conclusion
Cleaning your Roomba i7 is an important part of keeping it running optimally and efficiently. By following the steps outlined in this guide, you’ll be able to keep your Roomba in top condition and enjoy a cleaner, healthier home. So if you’re looking to get the most out of your Roomba, remember to clean it regularly and follow the tips for maintaining it.
FAQ’s
How often should I clean the dustbin and brush on my Roomba i7?
The dustbin and brush on your Roomba i7 should be cleaned regularly to keep the machine running optimally. Cleaning the dustbin and brush will also help to reduce the amount of dirt and debris that accumulates over time.
How do I properly align my Roomba i7?
Make sure your Roomba i7 is properly aligned before using it. Aligning the machine correctly will ensure that the sensors have a clear view of the room and that the robot vacuum can navigate around obstacles.
How do I avoid using harsh chemicals on my Roomba’s surfaces?
Avoid using harsh chemicals on your Roomba’s surfaces to keep them in good condition. Instead, use a gentle cleaning solution or a cloth to clean them.
