Unless you’re fortunate enough to have a workshop in your home, the odds are that at some point you will need to remove a screw without the correct tool for the job. Whether it’s because it’s so tightly screwed in, or there’s just no way of getting to it, at some point in your life you will find yourself with a screw and no screwdriver. Luckily, there are several ways that you can get around this problem. Check out our top 5 tips on how to unscrew a screw without a screwdriver.
How To Unscrew A Screw Without A Screwdriver?
1. Unscrew a screw using a pen
If there is nothing to use as a tool, then you can use your pens. You need to hold the pen at an angle and push on it. This will cause friction which will heat up the pen and melt the plastic. The melted plastic will make it easy to screw the screw back in place.
2. Unscrew a screw using a cloth
A cloth can also be used to unscrew a screw without a proper tool. You need to wrap the cloth around the head of the screw and pull it back in place with enough force so that the threads catch on each other again and hold each other in place. This works best for screws with wide heads.
3. Unscrew a Screw using hot water
You can also use hot water if you have no tool with you to unscrew a screwed-up head from its body. You need to fill some hot water in a bowl and place your head inside it for about 10 minutes or till it melts down enough for you to unscrew them together in one go by hand easily without any extra effort at all!
4. Unscrewing Screws using Glue!
You can also use glue if you have no tool with you to unscrew a screwed-up head from its body. You need to fill some glue in a bowl and place your head inside it for about 10 minutes or till it melts down enough for you to unscrew them together in one go by hand easily without any extra effort at all!
5. Unscrew a Screw using a Pencil
A pencil can also be used to unscrew a screw without a proper tool. You need to hold the pencil at an angle and push on it. This will cause friction which will heat up the pencil and melt the plastic. The melted plastic will make it easy to screw the screw back in place.
6. Unscrewing Screws Using Ice Cubes!
Ice cubes can also be used as effective tools for unscrewing screws without any extra effort or cost involved! You need to take an ice cube and hold it on your hand till it melts enough for you to grab it with your fingers properly, now wrap that ice cube around your finger so that its coldness sticks around it for about 10 minutes or till the ice cube melts down enough for you to unscrew them together in one go by hand easily without any extra effort at all!
7. Unscrewing Screws with Batteries!
Batteries can also be used as effective tools for unscrewing screws without any extra effort or cost involved! You need to take two batteries of different sizes, preferably both AA size batteries, now connect them together so that they form one long battery lead, now wrap that long battery lead around your finger so that its coldness sticks around it for about 10 minutes or till the batteries melt down enough for you to unscrew them together in one go by hand easily without any extra effort at all!
8. Unscrewing Screws with Ice!
Ice can also be used as an effective tool for unscrewing screws without any extra effort or cost involved! You need to take ice cubes and hold them on your hand till it melts enough for you to grab them with your fingers properly, now wrap that ice cube around the screw head so that its coldness sticks on it for about 10 minutes or till the ice cube melts down enough for you to unscrew them together in one go by hand easily without any extra effort at all!
Tips For Unscrewing A Screw Without A Screwdriver?
Use the Right Tool for the Job
If you’re removing a screw that is part of a machine or is very tightly screwed in, it’s important to remember that the right tool for the job makes all the difference. For this reason, if you’re trying to unscrew something like a stripped screw from a machine, there’s a chance that you may not be able to do it without the correct tool. Often, it’s better to replace the item than risk damaging it even more. However, if it’s a screw that is tightly screwed in or one that isn’t important to the machine, it’s possible to use the right tool for the job, but in an unusual way.
Try a Different Blade
If you’re trying to remove a screw from something like a wooden door, or a toy, you may find that it’s so tightly screwed in that it’s impossible to get a screwdriver in. If this is the case, a good trick is to try using a sharp blade rather than a screwdriver. If you can find a thin and sharp blade, such as a craft knife or box cutter, you may be able to get in between the screw and the wood. It’s unlikely that the blade will be able to remove the screw entirely, but it might just be able to loosen it enough to be removed by hand.
Use an Electronic Cordless Drill
Remember that the screwdriver is not the most important part of removing a screw. The most important aspect is the drill. If you’ve got the right drill, you will be able to remove the screw no matter how tightly it’s screwed in. For this reason, if you don’t have a screwdriver, but do have a cordless drill with the correct bit, you may be able to drill the screw out completely. It isn’t easy to remove a screw with a drill, but it is possible. One thing that you should remember if you choose to do this is that you must use a drill with a reverse function. If you choose to use a drill, you must also remember that it is strong enough to remove the screw. If it isn’t strong enough, there’s a real risk that it could break.
Try a Hammer and Screwdriver Together
If you don’t have the right tool for the job but have a hammer and screwdriver, you may be able to use them together to remove the screw. This is another option that is not ideal but is possible if you are stuck without a screwdriver. For this to work, you must first use the screwdriver to remove any wood that is in the way of the screw. Then, place the tip of the screwdriver against the screw and hammer the screwdriver down with the hammer. This should push the screw out, although you may need to do this a few times, as it can be difficult to get the force needed for this method.
Try a Vice Grip or Lock-Jaw Grip
If you’re struggling to remove a screw because it’s very tightly screwed in, you may find that a vice grip or lock-jaw grip is the perfect solution. For this method, you will need two items: an adjustable vice grip, and an adjustable lock-jaw. Vice grips are designed to hold onto things very tightly, while lock jaws are designed to hold onto things that are rotating. First, you should use the vice grip to grab the screw. Then, you should use the lock-jaw to grab the screwdriver. With the lock-jaw holding the screwdriver, you can then use the vice grip to unscrew the screw.
Conclusion
Removing a screw without a screwdriver is not an easy task, but it is doable. Fortunately, there are several tools you can use to remove the screw, even if you don’t have the right screwdriver for the job. If you’re ever in a situation where you need to remove a screw without a screwdriver, be sure to remember these tips to make the job easier.
